skip to Main Content

Chill Plate – Liquid Cooling plate for HyPer-Drive X1 and HyPer-Drive X144

$155.00

Description

Chill Plate – Liquid Cooling plate for HyPer-Drive X1 and HyPer-Drive X144

When combined with a proper liquid cooling pump and radiator, this Chill Plate will extract significant
amounts of heat generated by the controller, vastly extending the controller’s high power operation time.
This is a must have accessory for anyone looking to push the limits of our new HyPer 9™ Motor!
The HyPer-Drive X1™ has an operating temperature range of -40°C to +95°C. When the
controller’s heatsink temperature reaches +80°C, Thermal Cutback Mode will activate linear de-rating of
the controller’s output power. This linear de-rating continues until shut down at +95°C. Without a chill
plate, the current rating of a properly mounted HyPer-Drive X1™ is 750A for 2 minutes. A liquid
cooling loop, fed through this chill plate, can yield approximately 2-3 times the stock duty cycle. A
liquid cooling system is strongly recommended for any application requiring a continuous rating above
200 Amps.

  • Solid Aluminum
  • Machined channels
  • X1 mounting pattern
  • 1/8” NPT port holes

Additional shipping applies, freight quotes are calculated upon request or once you place your order.

×Close search
Search